I can pull out he crown 1 and 2 clicks into day set and time set respectively. Then I press the crown in and the watch is still in time set. As I’m screwing the crown in it will enter wind mode, but not before messing up the time. I’m very new to this but it seems like a short stem?
Seems like these posts have the same problem.
I built the Diver NH72 watch today, however I cannot set time accurately. When pushing the crown in from setting the time, it never clicks into the winding mode. Therefore, when initiating the screw down of the crown, it continues to rotate the hands by an hour or more before eventually swapping out of the time setting function.
Would this be a problem with the crown or the movement?
I have completed the watch but when I pull out the stem in hour settin position something don’t work well.
When I pull the stem out one step it set the date; in the second step it set the hour but after this the stem don’t came back in the positions 1 (date) or 0 (winding). It seems like there is no space or the stem is too short because when I press the crown this one goes to touch the case where the crown has to screw.
Have you any suggestions?
Thank You
Davide
